Behind Door #2

I decided it was finally time to deal with the aluminum soffits on the house. From building permits, I know the soffits were added in 1971, so I am a little apprehensive to see what they are hiding.

I started with the small side entry of the house to get an idea of how much effort this will take. Here is the before picture.It took a whopping 15 minutes to get the aluminum and all the nails down. I was extremely pleased to find the molding and beadboard underneath to be completely intact and in remarkably good shape. The after picture is below.
The wood is solid, but most of the paint has peeled off. I actually think this is great because it is going to make it easier to prep for repainting. I can only hope the rest of the soffit work goes this well (unfortunately I know better).

Close up after
By the way, if anyone knows where I can take aluminum scrap in Minneapolis (and hopefully get money for it), please let me know. Thanks.

Let there be Light!

The living room ceiling light is up and functional. It wasn't even that bad to install. I think it is interesting that the old mounting hardware on the fixture fit the old electrical box perfectly. While I have no way of knowing what fixture was originally there, I believe this one has got to be pretty close. I wonder how long the electrical box was covered up or how long it has been since this fixture lit anything.
The ceiling itself is also now painted (except for the edges near the trim). For the ceiling, we went with a Sherwin Williams color called Jersey Cream. We are usually awful at picking colors, but this one actually turned out well.

The other nice thing about having an adequate light fixture in this room is I can now work on the trim refinishing in the evening. Hopefully that will accelerate the process from its current 200 year pace.

Installing a Vintage Medicine Cabinet

The bathroom in our house has been remodeled numerous times over the years. Probably the thing I liked least about it when we bought the house was the cheap, tiny medicine cabinet. It was also ridiculously off center with the sink for no apparent reason. I forgot to take a picture of the wall before I took it out, so here it is on the guest bed in all its glory.Luckily, we were able to find a 1920's birch medicine cabinet on craigslist for a great price. It needed a new mirror and the hardware didn't really work anymore, but it was otherwise in amazing shape. Once I got it ready to install, I took out the old one which was held in by about 3 screws. Here is the sad looking hole it left in the wall. Once I cleared out the spacing boards, the opening looked like it does in the picture below. I got really lucky that the studs in this wall were 24" apart. The new medicine cabinet is huge compared to the old one so I was really concerned it would take significant demolition to get it to fit.
Once the space was empty, I just needed to add a couple boards to one side and two shims to the bottom so the cabinet would be level. It turned out better than expected. The only problem is that it is making the other remodeled features of the bathroom look worse. The antique nickel t-bar latch is from Guilded Salvage in Minneapolis. I just have to cut a couple tiles and put them back in place to complete the project (it will probably take me way too long to do this).

Progress on the living room ceiling

We finally dealt with the popcorn ceiling in the living room last weekend. It was the messiest, most exhausting project to date. We started by covering all the walls in 3 mil poly and the floor in 4 mil. We then sprayed the entire ceiling with water using a hand pump garden sprayer. While we let it soak in for about 20 minutes, we put on tyvek suits, goggles, and respirators. We then started scraping. It took 7.5 hours, and many gallons of water. In the end, we wound up with a giant dropcloth full of popcorn ceiling debris that looked like a giant haggis and weighed about 200 lbs. For anyone thinking about attempting to remove a popcorn ceiling, here are a couple things that will help. 1. Have a small sample of the texture tested for asbestos. I have read online that some popcorn ceiling texture contains asbestos and some doesn't. We had ours tested and it did not. 2. Fill up garbage bags with the popcorn material as you go. The popcorn texture soaks up an insane amount of water and becomes extremely heavy.

Before - popcorn texture with no central fixture (beautiful 80's track lighting though)
With most of the popcorn texture gone, we noticed a suspicious looking patch in the center of the ceiling.
As hoped, it turned out to be the original electrical box for the central fixture. The whole thing was just filled with plaster, including the wires.
Once the plaster was gone, I had to figure out how to get power back to the fixture. My hope was that the mystery switch that did nothing near our front door was the answer. This is the inside of the mystery switch. I found that the disconnected black and white rubber/cloth wiring in the lower left of the picture below led to the ceiling box. Incidentally, I still have no idea what the red wire in this box does. I was able to reconnect the old wires and found that they did go to the ceiling box and that it had power! I still find it bizarre that someone would plaster over a central electrical box in their living room, but I guess I find the track lighting pretty strange too. I am looking forward to putting the fixture up. It is the one on the left in the picture below. We got really lucky and found it on craigslist. It exactly matches the original dining room fixture. If anyone is looking for similar polychrome fixtures, this website has a great selection, though they aren't cheap.

Small Projects over the Holiday Break

I am really tired of working on the living room woodwork, so I decided to work on a couple small projects instead. The first was to strip and restore the upstairs door hardware. The hardware is nickel and most of it was coated in multiple layers of paint.
I started by boiling the hardware in a solution of water and dishwashing liquid for about an hour or so. I have this technique is even more effective if you soak the hardware longer, but I am not that patient.

Next, I used a little bit of Zip strip to get any stubborn bits of paint, and cleaned the surfaces with furniture refinisher. Unfortunately, the hardware really didn't have a nice patina underneath the paint, It actually looked like someone had stripped the hardware previously and removed the tarnish in the recessed areas of the pattern.

To restore the hardware, I used Brass Darkening Solution (bought at Rockler for under $5). This stuff works on nickel and steel in addition to brass. Once the nickel was sufficiently darkened, I used Maas polish to even out the finish, leaving the recessed areas dark.

It actually turned out better than I expected and the nickel hardware really stands out on the white doors.
After that, I decided to try the brass darkening solution on one of the unlacquered brass switchplate covers in the dining room. While you can still tell it isn't original, I like the darkened look better, and it definitely beats the hole in the wall that was there before.

Help with Missing Weatherstripping

I am trying to find a piece of galvanized steel weatherstripping that is missing from one of the casement windows in the dining room. Not sure why it was removed, but you can see daylight through the bottom of the window where it is missing. The window itself has a strip of bronze weatherstripping which locks under a steel flange the comes up a little more than a quarter inch. The back of the weatherstripping is a vertical steel piece that extends up about 1/2 inch and fits against the front of the window. Any thoughts on where I could find a replacement for such a thing? I check all the easy options (Ace, Menard's, Home Depot, etc) with absolutely no luck.

With weatherstripping

Without

Taking on the living room

The living room is not a pretty sight. The contrast against the recently finished dining room makes it look even worse. I can't put off dealing with it any longer. Here are the before shots.

The woodwork was painted at one time. It looks like someone tried stripping it, but gave up. Given how sloppy it looks up close, I am amazed I didn't notice this before. Check out the sweet mid 80's track lighting. Honestly, these are the world's dimmest lights. Given that I don't have any art on the wall, the only thing they light is a 4 foot section of plaster with a nice big crack in it.
I really think this is going to look great when it is done. I would just like to skip the many steps it takes to get there. The dining room took me a ridiculous 8 months, so I have to do better than that this time.